Technogym EXCITE+ VARIO, Technical Service Manual

Page: 119 / 171

- VARIO: Technical service guide- Ver. 2.1
Page 7.1
7. DISASSEMBLY OF COMPONENTS
7.1. DISMANTLING COMPLETE DISPLAY
OPERATION ACTIONS
Dismantling
COMPLETE
DISPLAY
1. Switch OFF the machine and disconnect the main power cable from
the power supply input module..
2. Remove the rear protection casing of the display (4 screws using a
Phillips screwdriver).
3. Remove the display fixing screws on the support plate (4 screws,
4mm hex wrench)
4. Disconnect all the cables connected to the display, coming from the
machine fame.
5. Remove the display.
6. Remove the display support plate (2 screws, 17mm wrench).
7. Remove the rear protection casing from the frame tube.
7.2. DISMANTLING FRONT FRAME PROTECTIONS
OPERATION ACTIONS
Dismantling FRONT
FRAME
PROTECTIONS
1. Remove the front LEFT lateral casing and then the RIGHT side one
(6+6 screws, 4mm hex wrench).
ATTENTION: during the reassembling phase, please take care
to respect the position of the screws considering their length (see
picture below)
.