ACTIVE WTV: Machine configuration
Page 20
1.4. RECALL PARAMETERS
It is possible to restore all the parameters to the values they had at the last save operation.
Carry out the operation by setting parameter
C-1
(address 801) to “
1
”, following the detailed
instructions provided in paragraph 1.2.8. “Read/Write registers”.
Although the changes made to the parameters come into effect immediately, they are not
automatically stored in permanent memory; this requires a specific write operation
effected using the command C-0.
Save the data by setting parameter
C-0
(address 800) to “
1”
, following the detailed instructions
provided in paragraph 1.2.8. “Read/Write registers”.
Incorrect programming of the AT driver may cause serious damage to the machine, or
result in malfunctions potentially dangerous to the user. Therefore, only attempt to
program the inverter if you are certain of performing the procedure correctly.
1.5. DEFAULT PARAMETERS
It is possible to restore all the parameters to the default factory values.
Carry out the operation by setting parameter
C-2
(address 802) to “
1
”, following the detailed
instructions provided in paragraph 1.2.8. “Read/Write registers”.
Although the changes made to the parameters come into effect immediately, they are not
automatically stored in permanent memory; this requires a specific write operation
effected using the command C-0.
Save the data by setting parameter
C-0
(address 800) to “
1”
, following the detailed instructions
Summary of Contents for ACTIVE Wellness TV RUN EXCITE
Page 1: ...ACTIVE Wellness TV 15 Display RUN EXCITE Machine configuration...
Page 2: ......
Page 37: ......
