Technogym ACTIVE Wellness TV RUN EXCITE, Machine Configuration

Page: 14 / 38

ACTIVE WTV: Machine configuration
Page 10
Parameter Description Range Default value
Par 09 DC motor encoder error timeout. [msec] 0 - 255 15
Par 10 FREE - 0
Par 11 Driving roller diameter. [mm] 0 - 1000 91
Par 12 Pulley ratio 0 - 9000 200
Par 13 Error status on AC motor encoder 0 - 1 0
To change the setting, press the
CHANGE
key and insert the value using the numeric keyboard.
Press
ENTER
key to confirm or
BACK
key to back forward.
After any changes to the parameter values, you need to load them in the low kit using
the “Write to low kit” function.
Press
HOME
to confirm and save,
FORWARD
or
BACK
to scroll the pages.
1.2.2. O
PERATING DATA
This function makes it possible to access the machine usage data stored in the low kit.
In addition to the machine usage data, this function also includes the 2 sub-functions described
below:
1.2.2.1. Read from low kit
To read the parameter values from the low kit memory and view them on the display, press
READ
FROM LOW KIT
key.
1.2.2.2. Write to low kit
To write the values of the currently displayed parameters to the low kit, press
WRITE TO LOW
KIT
key.
The machine usage data on the display is updated every 10 minutes. This means that, whenever the
machine is switched off, any data modified after the last memory update will be lost.
To correctly display the parameter values, you need to load them from the low kit, using
the “Read from low kit” function.