Cable fault locator
TDR-TA3.3T
________________________________________________________________________
________________________________________________________________________
23
9.2
In case of calibration due to the warranty repair, the calibration is mandatory
and free of charge.
9.3
When the device is already being used by the Customer only evaluating
calibration can be offered. The output pulse parameters will be measured (see Table 1) on
the screen of any oscilloscope with capacity of 50 or 75 Ohm. The length of cable section
with already known parameters will be also measured.
9.4
The interface functioning according to the keyboard commands should be
compared with the passport data.
10 Transportation and storage
10.1 TDR-TA3.3T, packed in containers, should be transported in closed vehicles
of any type, at any distance, and stored under conditions established by a group of 4 to
GOST 22261. When transporting by plane, TDR-TA3.3T should be placed in heated
sealed compartments.
10.2 The alignment and securing of cargo in vehicles should ensure a stable
position of cargo during transportation.
The shift of cargo during transportation is not permitted.
10.3 Railway cars, containers, and trucks used for the TDR-TA3.3T transportation,
should not have traces of cement, coal, chemicals, etc.
11 Marking
11.1
The TDR-TA3.3T has a marking, containing:
-
manufacturer’s trademark;
- the name of the device
– TDR-TA3.3T;
- factory number;
- year of issue.
11.2 The TDR-TA3.3T should be marked with the titles of control tools (keyboard, grips).
11.3 Marking of the TDR-TA3.3T should be done according to the design documentation.
