Cable fault locator
TDR-TA3.3T
________________________________________________________________________
________________________________________________________________________
21
6.10 Operation with the device volatile memory
The waveform can be saved to the volatile memory. To activate the memory
operating mode press the button
«
», and select one of the items from the menu with
«
» and «
»
“Exit” – exit from the mode;
“Memory exit” – output the waveform from memory (the title “memory” appears in
the right corner;
“To memory” – saving of a current waveform to the memory.
6.11 Battery control
Battery control in the TDR-TA3.3T is carried out according to a pictograph in the top
right corner of the display:
the symbol
«
» means the full charge of the batteries;
the symbol
«
» means that the batteries need to be charged.
6.12 Switching of the device lightning
The display lightning is being switched off/on by p
ressing the “LIGHT” button.
The lightning will be automatically switched of after 5 minutes downtime (not
pressed buttons). The lightning can be switched on with any button (except ON/OFF,
SECURITY).
6.13 Switching off the TDR-TA3.3T
The device can be switched off with the buttons ON/ OFF. The device is equipped
with the function of automatic power off after 10 minutes downtime (not pressed buttons).
7
Possible faults and their elimination
7.1
In case of any faults, contact the manufacturer only.
