7
- The choice of the operating frequency. The LED indicators of the receiver on the front
panel have inscriptions, corresponding to certain frequencies of the receiver:«50» 50 Hz,
«100»: 100 Hz, «512»: 512 Hz, «1k» – 1024 Hz, «8k» – 8192 Hz, «33k» -
–32768 Hz, «WB» «Wide band» (0,05...8,60 kHz). Operating frequency is selected by consistent
briefly pressing the button «Switching frequencies and operating modes» and is displayed on the
display corresponding flashing led for two seconds.
-Adjustment of the
receiver sensitivity and volume
levels is being made by the
corresponding buttons «more» and «less».
During adjustment and for 2 seconds afterwards the sensitivity level is displayed on the
scale by the blinking light emitting diode.
Change of the level is occurring step by step. When you change the level on five steps,
there is switching of the indication to the adjacent LED (at increasing
- The
sound generation mode.
The sound being fed to headphones is generated by the device
and modulates at frequency depending on the selected filtering frequency signal level. This mode
is selected by default during activation of the device.
- Change of the way of audio indication.
During long retention of the button
«Frequency
switch
» the device switches the mode of audio indication. Three audio indication modes
are implemented in the receiver:
-
The
natural sound mode
. The sound is fed to headphones through the filter on the chosen
one frequency in straightness off the sensor.
- The
mode of the built-in speaker.
The sound signal is generated by the device and modulates
at frequency, depending on the selected filtration frequency signal level, and is fed into the built-
in speaker. In this mode a natural sound feds to headphones as in the «Natural sound mode».
-
Increase and reduction of headphones volume level.
The volume in headphones
level is changing with the corresponding «Change of volume” on headphones buttons.
The volume level is displayed on the light emitting diode indicator with help of the blinking
light emitting diode.
increasing on the first, at reducing on the left.)
Change of the sensitivity level can be made by a short press of the «more» and «less» buttons,
as well as by their retention for achievement of the required level.
Increase and reduction of headphones volume level. The volume in headphones level is
changing with the corresponding «Change of volume” on headphones buttons. The volume level
is displayed on the light emitting diode indicator with help of the blinking light emitting diode.
Summary of Contents for Success CBI-116N
Page 1: ......
