technoac Success AG-309.15 N, Technical Description, Operating Instructions

Page: 64 / 64

DEVELOPMENT, MANUFACTURING AND SUPPLY OF INSTRUMENTATION
64
www.technoac.com
Appendix 6
Transmitter Indication
Battery holder
with..the.handle.in.the.
centre.for.removing..
Contains.8.alkaline.cells.
1,5V.“type.С”.
Electrical power supply field
One.of.the.three.categories.of.
power.source.VOLTAGE.“U”.and.
ABSORBED.CURRENT.“I”.is.always.
displayed.by.the.glow.of.one.of.the.
three-coloured.indicators.
Output parameters field
VOLTAGE.“U,.V”,.CURRENT.“I,.А”.
and.load.POWER.“P,W”
and.also.its.RESISTANCE.“R,.
Ω
./.k.
Ω
”..
.The.only.possible. red. glow.of.indicators.of.
this.field.means.“oscillation”.is.in.progress..
Internal parameters field
POWER.SUPPLY.VOLTAGE.
“ ”.and.FREQUENCY.of.the.
generated.continuous..“Co”.or.pulse.
“Pu”.signals.“ f, kHz ”..
Green .glow.of.POWER.SUPPLY.
VOLTAGE.indicator.
“ ”.can.be.seen.in.the.“stop”.mode,.
red .–.in.“oscillation”.mode.
Internal induction transmitting
antenna field “In”
In.“antenna”.mode.“In”.the.orientation.
mark.“In.axis”.should.be.positioned.
precisely.above.utility.axis.and.oriented.
parallel.to.its.direction.
CHOICE button
By.sequenced.presses.MODE.or.
PARAMETER.indication.can.be.chosen.
to.be.shown.on.the.“Digital.display”.
START/STOP button
The.sequenced.presses.are.switching.
the.device.from.“STOP”.mode.to.
“OSCILLATION”.and.back.
Digital display
shows.NUMERICAL.value.of.the.
parameter.(“ .”./.“f,kHz”./.“U,V”.
/.“I,А”./.“Р,W”./.“R,.
Ω
./.k.
Ω
”).and.
SYMBOLIC.notation.of.the.mode.
(“In”.-.internal.transmitting.inductor/.
“An”.-.external.induction.transmitting.
antenna/.“Co”.-.continuous.oscillation.
mode/.“Pu”.-.pulse.modulation.mode.
Type.of.the.displaying.value.is.defined.
by.the.CHOICE.button..
POWER
button
on./off.
switching.of.
the.electric.
power.
supply
LESS/
MORE
buttons
Decrement.
/.increment.
(adjustment).
of.the.
chosen.
(mode).or.
parameter.
value.
Modes field
has.indicators.of.“ANTENNA”“ ”.
and.“MODULATION”.“. ”.modes.
If.“earrings”.or.“clamp”.are.
connected.to.the.output,.the.
indicator.“ ”.not.glowing.
In.“Antenna”.mode,.the.indicator.
“ ”.is.always.glowing:. green .in.
case.of.internal.antenna.
In.case.of.“regular”.(not.modulated).
signal.the.indicator.“ ”.is.not.
glowing.
In.case.of.“MODULATION”.(special.
form.signal).the.indicator.
“ ”.always.glows:. green .in.pulse.
mode.“Pu”.
Therefore, current operating mode
is always displayed in the “modes
field”.
INDICATION EXAMPLE
“nominal”.
power.supply.
voltage
“low”.absorbed.
current
pulse.
modulation.
mode.“Pu”
“oscillation”.
operation.mode
output.voltage
.40V
“U” green “I” green “ ” green
red glowing
“
U,V
”
“
U,V
” → “40”