DEVELOPMENT, MANUFACTURING AND SUPPLY OF INSTRUMENTATION
16
www.technoac.com
With factory settings enabled, you can perform the cable location with network
frequency 50 Hz without the transmitter.
4. Start of work
If alkaline batteries are used -
.Before.start.of.work,.you.should.install.the.batteries.into.the.
corresponding.compartment.of.the.receiver.in.the.following.sequence:
Note
To.switch.on.the.receiver,.press.the.“Power”.button
Receiver switching
A.description.of..factory..settings..can..be..found..in..the.
“settings”.menu..You.can..go..back..to..factory..settings..by..
selecting.the.“reset.settings”.option...
Install.the.batteries,.
observing.the.polarity
Unsnap.Battery.
compartment..Pull.out.the.
ring.on.the.receiver.handle.
Install.four.new.elements.into.
the.battery.compartment.of.the.
device,.minding.polarity.
Install.the.battery.compartment.
into.the.body.until.it.snaps.
The.indication.of.the.Firmware.version,.manufacturer.logo.and...
device.name.will.appear.on.the.screen.
Then,.the.receiver.will.automatically.enter.into.“Route”.mode.
in.5.seconds..When.first.switching,.the.factory.settings.are.set.by..
default...The.filter.frequency.is.50.Hz.
External Power
..With.the.help.of.the.mini-USB.cable.(included),.the.operator.can.connect.to.external.power.
sources.with.4-7V.voltage..For.example,.a.power.bank.(supplied.separately).
The.external.power.source.can.be.placed.under.overclothes.of.the.operator..It.will.allow.an.
extension. of. the. battery. life. in. low. temperature. conditions.. External. power. can. be. used. with.
inserted.batteries..or.without.them..
NOTE:
Power Bank should be placed as far as possible from the antenna block of the receiver
in order to evade interference.
Summary of Contents for Success AG-309.15 N
Page 1: ......
