technoac Success AG-309.15 N, Technical Description, Operating Instructions

Page: 51 / 64

51
DEVELOPMENT, MANUFACTURING AND SUPPLY OF INSTRUMENTATION
www.technoac.com
Colour combinations “U
↔
I”.
The.possibility.in.principle.to.raise.the.output.signal.level.
“U,V”.depending.on.the.combination.of.the.indicators.
colours.“U.
↔
.I”.(if.no.other.restrictions.are.in.place)
Colour.of.the.glow
“U” “I”
YES
green green
yellow green
green yellow
NO
yellow yellow
red any
any
red
NOTES for “Internal parameters field” and “Output parameters field”
1). Red . colour.of.the.glow.of.any.indicator.means.that.“oscillation”.is.in.progress.
2).Parameter.or.mode.the.value.of.which.is.displayed.in.the.“Digital.field”.in.the.“stop”.passive.
mode.is.singled.out.by.the.flash.of.the.relevant.indicator.
11.2.2 “Internal Parameters Field”
(In.accordance.with.the..operator..choice)..
shows..the.numerical..values.of.the.following.
parameters.in.the.“Digital.field”..
1).POWER.SUPPLY.VOLTAGE.in.volts.“ .”:
-. the. lack. of. the. glow. –. another. display.
parameter.is.chosen.
-. green .colour.glow.–.power.supply.voltage.
in.the.“stop”.mode.
-. red .colour.glow.-.power.supply.voltage.“I”.
2).FREQUENCY.of.the.generated.signal.in.kilohertz.“ f,kHz ”:
-.the.lack.of.the.glow.–.another.display.parameter.is.chosen.
-.
green .colour.glow.in.the.“stop”.mode.–.the.set.frequency.of.the.output.continuous.“Co”.or.
pulse.“Pu”.signal.is.indicated.in.the.“Digital.field”.
11.2.3 “Output Parameters Field”
(only.in.“oscillation”.mode).at.the.choice.
of.operator.signifies.via. red .colour.the.value.
of.the.specific.output.parameter.that.
is.indicated.in.the.“Digital.field”:
-.“U,V”.-.output.voltage.in.volts.
-.“I,А”.-.load.current.in.amperes.
-.“P,W”.-.load.power.in.watts.
-.“R,
Ω
”.-.load.resistance.in.ohms.
-.“R,k
Ω
”.-.load.resistance.in.kilohms.
NOTE
In “antenna” mode “In” the only value available is “U,V”.