6
Operation in access point mode (bridge/repeater)
If configured as a
Client
, the router acts as a wireless card, bringing non-wireless Ethernet devices
into a wireless network.
Bridge/repeater router configuration
1.
Set the operating mode selector switch to
AP.
2.
Perform the steps described under
General router configuration
.
3.
In the next step,
Operation mode Setting
, you are asked for an operating mode. Select
Repeat-
er/Bridge Mode.
Confirm with
Next.
4.
Tick
Connect to 2.4GHz Network
if you operate your wireless network with 2.4 GHz (by de-
fault, this option is
not
selected). Click
Next.
5.
Under
Network Name (SSID)
and
Password
, now enter the credentials for the wireless network
you want to connect your C.M.I. to.
Confirm with
Next
and
Save.
The router may restart.
Subject to technical modifications as well as typographical and printing errors. This manual is only
valid for devices with the corresponding firmware version. Our products are subject to constant
technical advancement and further development. We therefore reserve the right to make changes
without prior notice.
© 2019
