4
General router configuration
First use the switch on the WNA to select an operating mode. The router restarts when the operating
mode selector switch is changed.
•
If you want to connect your C.M.I. to your wireless network, set the operating mode selector
switch of the WNA to
AP.
•
If you want to operate your C.M.I. via a mobile network, set the operating mode selector switch
of the WNA to
3G/4G.
A connection to the router is then established for configuration. There are 3 options for this:
•
Connect WNA to PC via Ethernet cable
•
Connect WNA to PC via wireless network
•
Connect WNA to smartphone/tablet via wireless network
For all options, the WNA must be supplied with power (via mini-USB).
To connect via a wireless network, you simply need to establish a connection with the WNA, as with
any other wireless router. For this option, you need the
SSID
of your WNA, which is printed on the
label.
To connect via Ethernet, connect your WNA to your PC via Ethernet cable.
Once the connection is established, open
in the browser of your
PC/smartphone/tablet to start the setup.
If this website is not available, try entering
192.168.1.1
in your browser instead.
The first step in the configuration is to assign a password. This password must be re-entered when-
ever you wish to access the router configuration.
Then select your time zone and confirm with
Next.
Scroll to the preferred operating mode.
