---------------------------------------------------------------------------------------
32
The daily application
Switching on/off
½
Turn the receiver on by pressing the button POWER at the device or on your
remote control.
½
On pressing the POWER button again, the receiver will be turned off.
½
Now, the receiver is in standby mode and the time will be indicated in the display
of the receiver.
To completely turn off the receiver from mains use the MAINS SWITCH at the rear of
the device. (Before starting the receiver again, it has to be turned on with the MAINS
SWITCH.)
Channel selection
Using the buttons CHANNEL UP/DOWN
½
You can change the channel by one up or down on pressing the button CHANNEL
UP/DOWN on the receiver or on the remote control.
Using the number buttons
½
Enter the channel number with the number buttons on your remote control.
For example:
1
for channel 1
1, and then 4
for channel 14
2, and then 3, and then 4
for channel 234
To enter a channel position with more than one digit you have about 3 seconds to
enter the next digit.
If you only want to enter a one-digit or two-digit channel position, you can speed up
the process by confirming with the OK button.
Using the channel list
½
Press OK.
A channel list will appear.
In TV mode only TV channels appear, and in radio mode only radio channels
appear.
½
The current channel is marked blue. Now, using the cursor keys you can select a
different channel. It will be marked red.
½
On pressing OK the selected channel will be tuned in.
½
With the buttons cursor up/down the marker moves a line up or down.
½
The cursor keys left/right turn to the previous or next page.
Volume control
This receiver is equipped with a volume control. This facilitates the handling,
because now, all important functions can be controlled from one remote control.
½
Adjust the volume with the buttons and VOLUME-.
½
On pressing the button MUTE the sound will be turned completely off e.g. on
pressing it again turned on.
