---------------------------------------------------------------------------------------
12
5.3
Installation
After you have adjusted your receiver to your individual needs you may have to
adjust it to your antenna, if necessary. The receiver was factory pre-programmed to
ASTRA and EUTELSAT with a Universal-LNB (see appendix: Technical terms).
These channels will be received after installation of the receiver without additional
adjustments.
If you would like to receive different satellites or use a different LNB you need to
adjust your receiver as follows:
½
Call Main Menu with the MENU button.
½
Choose the menu line Settings by marking the corresponding line red with the
help of the cursor keys up/down.
½
Confirm with OK.
The sub-menu Settings appears.
½
Choose the menu line LNB settings by marking the corresponding line red with
the help of the cursor keys up/down.
½
Confirm with OK.
The sub-menu LNB appears.
Main Menu>Settings>LNB
DiSEqC
on
DiSEqC
Satellite
LNB Test
Position/Option
A/A
ASTRA 19..
continue
B/A
EUTELSAT 13..
continue
A/B
no satellite
continue
B/B
no satellite
continue
The following adjustments can be made in this sub-menu:
5.3.1 DiSEqC on / off
DiSEqC is used for the control of big antenna systems (see appendix: Technical
terms).
½
Turn DiSEqC on or off with the OK button.
5.3.2 Adjustments of the switching matrix and LNB settings
The menu lists the four switching criteria of the DiSEqC control. The device is pre-
programmed to receive ASTRA in the position A/A and EUTELSAT in position B/A of
a multiswitch. If the switching matrix of your reception unit should have been
differently set up or receives different satellites you can adjust the receiver to your
individual needs.
½
Select the DiSEqC position/option you would like to change (e.g. DiSEqC A/B-no
satellite) by marking the line in the satellite column red with the help of the cursor
keys +/- and up/down.
½
Confirm with OK.
A selection of different satellites appears.
