
---------------------------------------------------------------------------------------
28
Processes one or more channels on a satellite. That is: reception of the data of the
ground station, amplification and transmitting back to earth.
Universal-LNB
A three band LNB for the reception of the frequency ranges FFS (10.70 - 11.70
GHz), BBS (11.70 - 12.50 GHz) and FFS high band (12.50 - 12.75 GHz).
The whole range is grouped into 2 bands.
Low band: 10.70 - 11.80 GHz;
LOF 9750 MHz
High band 11.70 - 12.75 GHz;
LOF 10600 MHz
Supply voltage
The receiver provides the LNB with a voltage of 14 or 18 Volts via the coaxial cable.
Viaccess
Digital encoding system.
Intermediate frequency
The frequency range transmitted by the satellite cannot be transferred via a cable
and therefore has to be converted into an intermediate frequency range of 950 to
2150 MHz by the LNB. This makes the transmission to and the processing by the
receiver possible.
1
st
IF = Intermediate frequency
10
Technical data
Front end / channel decoder
Input frequency range
950 .... 2150 MHz
Input frequency level range
- 65 dBm ... - 25 dBm
Noise figure
12 dB max.
RF input connector
F type, female
Input impedance
75 Ohm
Output for 1
st
IF (loop-through)
950... .2150 MHz
RF output connector
F type, female
Output impedance
75 Ohm
IF bandwidth
36 MHz
AFC range
± 3 MHz
Demodulation
shaped QPSK
Symbol rate
(1) 4... 30 Mbauds, SCPC / MCPC
FEC Coding
concatenated Viterbi and Reed Solomon
Viterbi rates
1/2, 2/3, 3/4, 5/6, 7/8, automatic detection, (K=7)
Roll-off factor
35%
De-multiplexing:
De-multiplexing
according to ISO 13818-1
Video decoding:
Video compression
MPEG2 and MPEG1 compatible
up to MP@ML (main profile @ main level)
Video standard
PAL / 25 Hz
Picture-surface
720 pixel x 576 lines
Picture format
4 : 3 / 16 : 9