20
SCART MODE
SETUP MENU > DISPLAY MENU
ASPECT RATIO
The ‘SCART mode’ option enables you to choose
between Composite or RGB video signal via SCART.
All TVs will be compatible with Composite video via
SCART (the factory setting), but RGB will give a better
quality picture for TVs compatible with this setting.
To check the current setting:
Open the ‘DISPLAY’ setup menu.
•
Step to the ‘SCART Mode’ option.
•
The current setting will be shown (Composite or RGB).
To change the setting:
Press
•
OK
.
The setting will change between Composite and RGB.
The ‘Aspect ratio’ option enables you to change the
signal from your receiver to match the shape of your
TV.
NOTE: Most widescreen TVs require an Aspect ratio
setting of 16:9.
To see the setting options:
Open the ‘DISPLAY’ setup menu.
•
Select the ‘Aspect Ratio’ option.
•
The setting pane will be displayed.
To change the setting -
Step to the setting you want.
•
As you change the settings, the aspect ratio of the picture
will update.
RESOLUTION
The ‘Resolution’ option enables you to change the
resolution to match the performance of your TV.
NOTE: This setting only affects the resolution of the
digital HDMI output of your receiver, not the analogue
CVBS output. The analogue output resolution is fixed at
576i (PAL) or 480i (NTSC).
To check the current setting:
Open the ‘DISPLAY’ setup menu.
•
Select the ‘Resolution’ option.
•
The setting pane will be displayed.
To change the setting:
Step to the setting you want.
•
As you change the setting, the resolution of the picture
will update.
To save a setting and exit:
Press
•
MENU
.
The setting will be saved.
NOTE: If you change to a setting that is not supported
by your TV, you may not be able to see the menu to
navigate back to the correct setting. In this case,
connect a TV to the receiver via the CVBS output. This
has a fixed resolution so will enable you to view the
menu and set the HDMI resolution setting correctly.
