Technika BB 207, User Manual

Page: 9 / 12

7
User Handbook
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying this unit.
IMPORTANT SAFETY INFORMATION
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a slightly damp cloth.
• Do not block any ventilation openings.
• Install in accordance with the manufacturer's
instructions.
• Do not install or operate near any heat sources
such as radiators, stoves, or other apparatus that
produce heat.
• Unplug this apparatus during lightning storms or
when unused for long periods of time.
• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as the power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
•
Warning:
To reduce the risk of fire or electrical
shock, do not expose this product to rain or
moisture. The product must not be exposed to
dripping and splashing and no object filled with
liquids such as a vase of flowers should be placed
on the product.
• No naked flame sources, such as candles, should
be placed on the product.
•
Caution:
Changes or modifications not expressly
approved by the manufacturer could void the
user’s authority to operate this device.
•
Caution:
Usage of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous exposure.
These labels tell you that the unit contains a Laser
component. Do not stare at the laser lens.
IMPORTANT
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, this
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.