Technica 283150, User Manual

Page: 5 / 12

55
5. Product function
1. ” ” Power
a. When the power is turned on, the button and indicator light are on. After
2S, the machine enters the power saving mode. (only ” ” on )
b. In the power saving mode, press this button to wake up the machine
and enter standby mode, ready to work, at this time, the digital tube (6)
will display the current temperature. The digital tube (7) shows the last
working process’ set working hours.
c. In standby mode (the button indicator is fully illuminated), press this
button to enter the power saving mode (only ” ” on)
d. During the work, press this button to enter the power saving mode directly.
2. °C/°F Temperature unit switch button
a. Click on ”°C/°F” to select the temperature display unit of the machine.
There are two temperature units of Celsius and Fahrenheit to choose
from.
3. TEMP/TIME Temperature, time adjustment switch button
a. Click on ”TEMP/TIME” to toggle the temperature or time setting. When
the temperature digital tube (6) is flashing, set the desired target tem-
perature with ”+” and ”-”; when the time digital tube (7) is flashing, the
desired target time can be set with ”+” and ”-”.
*After the digital tube flashes 10 times, if there is no setting operation,
the machine will exit the temperature/time setting state. If you need to
reset it, click ”TEMP/TIME” again to enter the setting state.
*In the working mode, press and hold the ”TEMP/TIME” button, the digital
tube displays the time and temperature that have been set.
4. Start/Stop button
a. In Standby mode, click ”Start/Stop”, the machine starts working.
b. Second Press ”Start/Stop”, the time begins to count down.
c. Third Press ”Start/Stop”, the machine stops working, back to standby
mode.
5. ”+” and ”–” Adjustment button
a. Click on ”TEMP/TIME” to select the content (temperature or time) to be
adjusted, then use the ”+” and ”-” buttons to adjust to the desired tem-
perature or time.
6. Temperature digital tube
a. Display real-time working temperature;