11
How to clean:
1. Use the mixed liquid in 75% water and 25% vinegar, them pour it into a con-
tainer till the Max line of the machine.
2. Turn on the machine, set the working temperature 80°C/(176°F) and set
the time 3 hours (03:00), then single press the ”Start/Stop”. When reach the
desired presetting temperature, press ”Start/Stop” to start the timer.
3. When the timer indicates 00:00, stop the machine and turn off the power,
unplug and let the machine cool.
4. Drain out the water from the container and use the fresh water to clean the
device.
11. Troubleshooting
Error code
Cause of issue
Troubleshooting
H20
The water level is lower
than the lowest water
level or higher than the
highest water level
Turn off the machine
power: If the water
level is too low, add the
right amount of water
to the container; if the
water level is too high,
remove the water from
the container.
E02
1. Whether the heating
pipe is normal;
2. Whether the internal
wiring of the machi-
ne is normal;
3. Is the temperature
sensor normal?
Need to ask
a professional for
repair
** During the use of the machine, if any other problems arise, please ask spe-
cialist to check the machine. Do not attempt unauthorized repairs to avoid
accidents.
12. Warranty and After Sales Service
1. Make sure the working platform flat, clean and tidy.
2. Warranty is limited to damage caused by production defects and household using.
3. The cost of parts and maintenance will be charged due to improper use or
other non-product quality problems.
4. Please keep the purchase vouchers.
