CM CAN Combo
User Manual
7
1.2
Warranty and Safety Information
Before operating the device, read this manual thoroughly and retain
it for your reference.
The latest documentation for the CM_CAN_Combo can be
downloaded here:
https://technica-engineering.de/produkt/capture-module-can-
combo/
Use the device only as described in this manual.
Use only in dry conditions.
Do not insert any foreign object in the slots/openings of the housing.
Do not apply power to a damaged device.
The device may only be used by specialists.
Do not open the device. Otherwise warranty will be lost.
This device is designed for engineering purpose only.
The device may only be used by specialists.
Special care has to be taken for operation.
This device is intended for the analysis of bus systems and IVN
networks in labs and in cars.
If all safety standards based on the state-of-the-art are taken into
account in the customer application (e.g. ISO26262), this device can
be used in safety-critical applications in a vehicle. However, the user
must integrate this device in the risk analysis of his system, following
the safety standards. The device must be evaluated according to the
QM development standard.
As this device is likely to be used under rough conditions, warranty is
limited to 1 year.
Manufacturer liability for damage caused by using the device is
excluded.
Caution
: The device can get hot.
Do not cover the device due to fire danger.
Do not place the device near to highly flammable materials due to fire
danger.
Do not use the device above the specified operating temperature.
The operating temperature is the ambient temperature of the
installation space.