CM CAN Combo
User Manual
35
Figure 4-18: User interface basic filter (Add new entry)
Bus
: Here can be defined the CAN-Port, to which the filter is applied.
Note
: For other Busses than CAN no Filter is available
Parameter to filter
: O
ne “Parameters to filter” can be set
right now. It is CAN_ID.
Note:
Each “Bus” –
“Parameter to filter” pair is possible for three times
Value
: One value in defined format must be typed in this field
CAN_ID: Hexadecimal, e.g. “1FB”
Action
: only one action is available
DROP
: Each message that matches the Filter Entry will not be mirrored to
the logging port. It will be dropped.