GB
3
CONTENTS
1
-
General
.......................................................................................... 3
2
-
Presentation
..................................................................................
4
3
-
Installation
.....................................................................................
6
4 - Connections / Electrical wiring diagrams ..................................... 8
5 - Frame / grille installation ............................................................. 19
6
-
Accessories
................................................................................. 19
7
-
Starting
.......................................................................................
21
8
-
Maintenance
...............................................................................
21
9 - Technical data ............................................................................ 22
1 - GENERAL
1.1 - FOREWORD
• The equipment must be installed, started-up and
maintained by authorised and qualified personnel,
in accordance with local rules and professional
standards.
1.2 - GENERAL SUPPLY CONDITIONS
• Generally speaking, the material is transported at
the consignee’s risk.
•
The consignee must immediately provide the
carrier with written reserves if he finds any damage
caused during transport.
• Do not place objects or tools on the device.
• Position the device as near as possible to its place
of installation without unpacking it.
1.3 - VOLTAGE
• Before any operation, check that the voltage and
the frequency indicated on the device corresponds
with that of the mains.
1.4 - OPERATION LIMITS
• Hydraulic circuit:
- minimum water inlet temperature: 4°C.
- maximum water inlet temperature:
main battery: 70°C
secondary battery: 80°C
Note:
For reasons relating to comfort (homogeneity of
the air temperature in the room), not exceeding
a water inlet temperature of 55°C in the battery
is recommended.
- Maximum operating pressure: 16 bars.
• Ambient air:
- Minimum air recirculation temperature: 5°C
- Maximum air recirculation temperature: 32°C
Important: During installation shut-down, in
case of connection to an outside air vent or in
case of ambient temperature near 0°C, there
is a risk that the hoses may freeze. Envisage
draining the hydraulic circuit.
1.5 - USE OF EQUIPMENT
• This equipment is intented for the air-conditioning of
premises and to provide comfort for the personnel.
1.6 - MODELS
2
TUBES:
4
TUBES:
CAW3P2I5A
CAW3P4I5A
CAW4P2I5A
CAW4P4I5A
CAW5P2I5A
CAW5P4I5A
CAW6P2I5A
CAW6P4I5A
CAW8P2I5A
CAW10P2I5A
DECLARATION OF CONFORMITY
This product is marked as it satisfies Directives:
– Low voltage no. 2006/95/EC (Standard: EN60335-2-40:2003 (incl. Corr.:2006) + A11:2004 + A12:2005 +
A13:2012 + A1:2006 + A2:2009 con EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008
+ A14:2010 + A15:2011).
– Electromagnetic compatibility no. 2004/108/EC, 92/31 EEC and 93/68 EEC. (Standard: EN55014-1 (2006) +
A1(2009) + A2(2011), EN 55014-2 (1997) + A1(2001) + A2 (2008), EN 61000-3-2 (2006) + A1(2009) + A2(2009),
EN 61000-3-3 (2008)
– RoHS2 no.2011/65/EU.
This declaration will become void in case of misuse and/or non observance though partial of manufacturer’s
installation and/or operating instructions.
3742551181-I-TEC-CAW-GB.indd 3
3742551181-I-TEC-CAW-GB.indd 3
27/01/2015 13:55:33
27/01/2015 13:55:33
