8
Speed 00-99 Strobe 00-99
Speed & Strobe adjustable
P8 FLOW 3
Speed 00-99 Strobe 00-99
Seven color relay chase in 1 direction
Speed & Strobe adjustable
P9 FLOW 4
Speed 00-99 Strobe 00-99
Seven color relay chase in 2 direction
Speed & Strobe adjustable
P10 FLOW 5
Speed 00-99 Strobe 00-99
Seven color chase from two sides to middle
Speed & Strobe adjustable
P11 FLOW 6
Speed 00-99 Strobe 00-99
Seven color chase from middle to two sides
Speed & Strobe adjustable
P12 FLOW 7
Speed 00-99 Strobe 00-99
Seven color chase
Speed & Strobe adjustable
P13 FLOW 8
Speed 00-99 Strobe 00-99
1.BLACK-RGB 2. BLACK-RGB
Two color chase in 1 direction
Speed & Strobe adjustable
Blackout-Red-Yellow-Green-Cyan-Blue-Purple-White
P14 FLOW 9
Speed 00-99 Strobe 00-99
1.BLACK-RGB 2. BLACK-RGB
Two color chase in 2 directions
Speed & Strobe adjustable
Blackout-Red-Yellow-Green-Cyan-Blue-Purple-White
Auto Run Operation
In Auto Mode the programs are called up automatically in a continuous loop.
Press the MODE button to select the AUTO Mode. Press the ENTER button to select the
desired frequency of the loops. The desired frequency of the loops (Frequency = FQN
01-99) can be selected using the UP/DOWN buttons. Please press the ENTER button to
confirm and to exit the AUTO Mode.
Slave Operation
The master/slave operation enables several LED Banks to be synchronized and
controlled by one master device. For slave operation to function, XLR data cables must
be used to connect fixtures together. To set this mode, press the MODE button to select
the SLAVE mode. Any devices set in this manner can now be controlled by the master
unit. Press the ENTER button to confirm and to exit the SLAVE Mode.
Sound Active Operation
Press MODE button until you reach the SOUND controlling mode, then the fixture will
respond to the sound of audio. Press UP/DOWN to adjust the sound sensitivity levels
(SENS00-31) & frequency (FQN01-99) of loops. Press the ENTER button to select the
desired sensitivity and frequency of the loops, respectively. Press the ENTER button
again to confirm and to exit the SOUND Mode.
