background image

 7

Setup and Operation Modes (LCD Display) 

 
The following refers to the different modes that are available on this fixture via the LCD Control 
Panel display. All functions are selectable from the display menu located at the back of the 
fixture. 
 

Note

: The actual fixture may vary from the illustrations shown in this manual. 

 

Control Panel Menu & Operation Settings 

Use the fixture’s Control Panel to access the Control Menu.  The MODE Key puts the 
fixture in the settings menu itself. The UP/DOWN moves through the menu options and 
allows the assignment of a value. The ENTER key is used to enter that option and 
confirms the selection once the UP/DOWN is used to adjust the value. Settings are 
stored and recalled on subsequent power cycles. R, G, B, refers to Red, Green and Blue 
respectively. DMX and master/slave modes require data cables to be connected between 
fixtures. Manual and some stand-alone modes do not require data cables for 
independent use of the fixture.  

 

Built-in Program Chase Operation (P01-P15) 

A program is a sequence of different steps that will be called up one after another in a 
continuous loop. With the DL-OCTOBAR830TC fixture, you can select one static color or 
from 14 different program chases. Each program is described in the table below. 

 
To select a program: 

Press the MODE button to select the internal PROGRAM Mode. Select the desired 
chase from P01 to P14 using the UP/DOWN buttons. Press the ENTER button to select 
speed and flash settings, respectively. You can select the desired values via the 
UP/DOWN buttons. Speed is from slowest 00 to fastest at 99. Set strobe flashing from 
none at 00 to fastest at 99. Press the ENTER button to confirm and to exit the STAND 
ALONE Mode. 

 

 
P1 STATIC COLOR 
CL:RGB  Flash 00-99 

Blackout, Red-Green-Blue-Yellow-Cyan-Purple-White
Flash strobe speed adjustable. 

P2 DREAM 
Speed 00-99  Flash 00-99 

Seven color dreaming 
Speed & Flash strobe adjustable 

P3 METEOR 
Speed 00-99  Flash 00-99 

Seven color flow 
Speed & Flash strobe adjustable 

P4 FADE 
Speed 00-99  Flash 00-99 

Seven color fade 
Speed & Flash strobe adjustable 

P5 CHANGE 
Speed 00-99  Flash 00-99 

Seven color change 
Speed & Flash strobe adjustable 

P6 FLOW 1 
Speed 00-99  Flash 00-99 

Seven color chase 1 
Speed & Flash strobe adjustable 

P7 FLOW 2 
Speed 00-99  Flash 00-99 

Seven color chase 2 
Speed & Flash strobe adjustable 

P8 FLOW 3 
Speed 00-99  Flash 00-99 

Seven color chase 3 
Speed & Flash strobe adjustable 

Summary of Contents for DL-QUADBOX1630TC

















Reviews: