15
Maintenance
Make sure fixture is cool and disconnected from power mains before any service.
Weekly operating hours and environmental conditions will establish how often the fixtures need
cleaning. Fixtures should be cleaned and inspected at least once a month to maintain optimum
performance. Accumulation of dust and fog residue increases heat build up, can lead to
malfunctions, overheating and reduction in maximum light output, reduced fixture life and over
all performance. Before conducting any maintenance, disconnect fixture from power mains.
1) Disconnect fixture from power mains.
2) Use a vacuum with a soft brush to remove dust collected on external vents, heat sinks and
internal components. If using an air compressor, use low pressures and extreme care to
prevent damaging any internal parts or effects.
4) Clean all optical elements when the fixture is cold. Use a soft lint free cotton cloth or tissue
and cleaner safe for plastics.
5) Inspect clamps and safety cables to ensure fixture is secure and safe.
Accessory Items
(sold separately)
Order Code
Description
CLAMP-MEGA/B
Mega Heavy Duty Aluminum Clamp – Black
CLAMP-CBHALF
Half Cheeseborough Coupler 300kg Max Load
SAFETYCABLE18B
Safety Cable Black 18”
SAFETYCABLE18S
Safety Cable Silver 18”
CA-XLR5/5
Pre-made 5’ 5-pin XLR Cable
CA-XLR5/10
Pre-made 10’ 5-pin XLR Cable
CA-XLR5/25
Pre-made 25’ 5-pin XLR Cable
CA-XLR3/5
Pre-made 5’ 3-pin XLR Cable
CA-XLR3/10
Pre-made 10’ 3-pin XLR Cable
CA-XLR3/25
Pre-made 25’ 3-pin XLR Cable
CO-XLR5M
XLR Connector 5-pin Male
CO-XLR5F
XLR Connector 5-pin Female
CO-XLR3M
XLR Connector 3-pin Male
CO-XLR3F
XLR Connector 3-pin Female
CO-XLRTERM5
XLR 5 Pin Data Terminator
CO-XLRTERM3
XLR 3 Pin Data Terminator
CO-XLR3MTO5F
XLR 3 Pin Male to 5 Pin Female Adapter
CO-XLR5MTO3F
XLR 5 Pin Male to 3 Pin Female Adapter
