7
technetix.com
1.3 Base installation of IN and OUT connectors
If installing a multitap and both cables come from the same direction, you can relocate the “blind plugs” to the side ports (
Fig. 4
)
,
making sure they are torqued at 40in/lbs (4.5 N-m), then the shielding effectiveness against 4G/5G signals remains high.
1.4 Signal Conditioning
Signal conditioning is used in certain networks to give a specific amount of tilt to the tap ports enabling them to reach homes
with a flat signal. In the XGT platform the signal conditioning plug-ins can be installed in the faceplate, which are all delivered
with a 0 dB jumper. When installing a cable equalizer or cable simulator, the 0 dB jumper in the faceplate will be replaced by the
signal conditioning plug-in.
Available plug-ins
Cable simulator
Cable equalizer
1.2 GHz optimized
XGT1200-CSxx
XGT1200-CExx
1.8 GHz optimized
XGT1800-CSxx
XGT1800-CExx
Fig. 4
