11
technetix.com
2.3 Example installations
1. Install complete tap 8-way 35 dB
Check the tap value required and select the materials from your vehicle, no detailed materials planning is required for specific tap
values and faceplates combinations.
1.
Select your parts using the guide on page nine.
One housing, one 8-way faceplate and one coupler module 25 dB (CM25)
(delivered with 29, 32 and 35 dB stickers)
2.
Place the CM25 inside the housing and secure it by turning the placeholder 90° and tighten the screw.
3.
Place the faceplate with dB sticker on the tap space with the arrow pointing in the same direction on the tap
as the arrow on the coupler module to indicate the directionality of the tap signal IN to OUT.
