6
XGT_User Manual
1.2 Installing cables to the IN and OUT connectors
The housing is fitted with a spring loaded 5/8 female connector (
Fig. 1
), designed to fit a standard KS 5/8 male connector
without the need to secure the pin with a screw contact (unlike legacy multitaps).
1.
Cut the 5/8 pin to a length of 1.34” (34 mm) with a tolerance 0.039” (+/- 1 mm) also marked on the back
of the housing (
Fig. 2
).
2.
The XGT 5/8 female connector takes pins with a diameter of 0.065” – 0.075” (1.65 - 1.91mm).
3.
Torque the KS connectors to 40 in/lbs (4.5 N-m).
Pin length 1.34" (34 mm)
IMPORTANT:
The total pin length = pin length and connector thread length (
Fig. 3
).
Fig.2
Fig. 1
Fig. 3
