04/2019 - AE/V1.16
13
Technetix Group Limited
2.3 Installing coaxial connectors
Input/output cable connectors
1� Cut the 5/8” threaded connector pins to a length of 1�2” (30�5 mm)� The pin length
should be measured from the connector housing to shoulder to the pin tip�
Use the internal pin length guide
to check the correct pin length�
Place the 5/8” connector housing
shoulder against the amplifier
housing lip and check the pin length
against the guide�
2� Tighten the connectors into the housing in accordance with the connector manufacturer’s
specification� The maximum torque force for the PG-11_5/8 adapter ring is 20 Nm�
