04/2019 - AE/V1.16
11
Technetix Group Limited
2.2 Housing mounting
There are two options for mounting the DBC-1200S amplifier� The first option is to use the strand
mounting clamps supplied, as shown in example 1� The second option is to use the rear 0�25” (6 mm)
threaded holes on the back of the unit, as shown in example 2�
Using strand clamps
The unit is supplied with two strand clamps that are attached using two 0�25”
(6 mm) threaded 0�4”
(10 mm) long countersunk screws on to the top of the unit (see following pictures)� Once the strand
clamps are attached, the amplifier can be offered up to the strand mounting location and clamped
into position�
Example 1
Example 2
