04/2019 - AE/V1.16
2
Technetix Group Limited
Safety
Caution:
AC voltages in the range of 20 – 65 VAC (110/230 VAC local
power) can be present when power is connected to the DBC-1200S.
Observe all notes and cautions in this user manual.
Intended audience
The DBC-1200S User Manual is intended for network engineers and technicians responsible for
planning, configuring, installing and testing the Technetix DBC-1200S amplifier� Installers should
have a working knowledge of coaxial cable systems and cabling practices�
Specific tools list
The following tools and supplies are required when installing a DBC-1200S amplifier:
■
7/16” socket driver
■
Set of Phillips head screwdrivers
■
Diplex removal tool (part # 1901053) (only needed if changing the diplex filters)
■
Torque wrench
■
Appropriate bolts/screws/washers for mounting the DBC-1200S (see page 11)
■
Appropriate USB cable
-
USB A type for the DBDCM-A1 FSK module (for local control/ALSC)
-
USB mini-b for the DBDCM-C1 module (for local control only)
The connector on the other side of the cable will depend on the device
you are using to configure the DBC-1200S (laptop, android or iPhone)
