manualshive.com logo in svg

technetix AIMA3000.FT5P, Product User Manual

Share
Download
technetix AIMA3000.FT5P Product User Manual Download Page 9

AIMA3000.FT5P Product User Manual

Technetix Group Limited

[email protected] 

•

 technetix.com

May/2016 - Version 1.0

9

3.2 Product Key Features

• 

DOCSIS 3.1 Compatible with operating bandwidth up to 1218 MHz

• 

Suitable for DWDM applications supporting ITU channels with 100 GHz steps

• 

All-digital QAM loading from 45 MHz to 1218 MHz

• 

Link distance of up to 60 kilometers without any dispersion compensation required

• 

High SBS suppression level to allow launch power up to +20 dBm

• 

Automatic gain control (AGC) for a consistent optical modulation index (OMI)

• 

Automatic laser power control for consistent optical output

• 

Comprehensive alarm reporting and monitoring

• 

Remote firmware upgrade and auto upload/download of configuration files through ASMM web interface or  

     

using Technetix NMSE

• 

Bulk firmware updates through Technetix NMSE

• 

FCC, CE and RCM (1) compliant

    

(1)

 See Declaration of Conformity for current status.

Summary of Contents for AIMA3000.FT5P




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands