14
Shut OFF the Car Alarm
If you press the remote control button and hold it down (4-5 seconds)
you will hear 4x short “beep”.
Following this, the car alarm’s battery will be turned off. This means that
the not only will the PIR sensor be shut off, the entire car alarm will be
shut off for prolonged use or for transportation.
The car alarm can only be activated/armed again if you:
- plug it into the cigarette lighter socket
- connect it via MicroUSB
- as soon as the cigarette lighter socket gives a new charge impulse to
the device, if it is still plugged into the cigarette lighter socket.
The remote control and the panic button are not functional when the
device is shut off.
Change remote control battery
If the remote control stops working, then you must change
the battery (CR2032).To change the battery, open the
remote control. Use a flat, wide object to remove the rear
cover of the remote control. To do this, insert the
corresponding object into the groove on the top. Now,
carefully pry open the back cover. You will now see the
circuit board with the battery. Change the battery and
close the remote control.
Pair a new remote control
⚫
Open the remote control. Use a flat, wide object to remove the rear
cover of the remote control. To do this, insert the corresponding object
into the groove on the top. Now, carefully pry open the back cover. You
will now see the circuit board with the battery.
The shut off feature does not work when the car alarm is connected
for charging.
If no battery is inserted, insert a battery (CR2032)
