Technaxx Pro TX-168 User Manual Download Page 4

BATTERY SAFETY INSTRUCTIONS 

- DO NOT burn products and their batteries and do not expose them to 
direct sunlight or to high temperatures (e.g. in hot automobiles or near 
hot stoves). Batteries may explode if overheated. 
- Only use this product for its intended purpose and follow the general 
and  battery  safety  instructions  as  described  in  this  user  manual. Any 
misuse of the product  can cause electric shock, burns, fire and other 
hazards or injuries. 
-Charge,  use  and  store  the  product  at  a  temperature between  14°F  / 
10°C and 122°F / +50°C. 
- Always unplug the product once it is fully charged. 
- If the product becomes abnormally hot, gives off an abnormal smell, 
changes color or if charging takes much longer than usual, stop using 
and charging the product and contact your local dealer. 
- DO NOT place products and their batteries in microwave ovens or on 
induction cookers. 
- This product contains a rechargeable battery that is non-replaceable. 
DO NOT open the product to replace the rechargeable battery. 
- When you handle batteries, make sure that your hands, the product 
and the batteries are dry. 
- To prevent batteries from heating up or releasing toxic or hazardous 
substances, do not modify, pierce or damage products and batteries and 
DO  NOT  disassemble,  short-circuit,  overcharge  or  reverse  charge 
batteries. 
- To avoid accidental short-circuiting of batteries after removal, DO NOT 
let  battery  terminals  come  into  contact  with  metal  objects  (e.g.  coins, 
hairpins, rings).   
- DO NOT wrap batteries in aluminium foil. Tape battery terminals or put 
batteries in a plastic bag before you discard them. 
- If batteries are damaged or leaking, avoid contact with the skin or eyes. 
If  contact  occurs,  immediately  rinse  thoroughly  with  water  and  seek 
medical care. 
-  Please  dispose  of  used  batteries  properly,  in  accordance  with  local 
regulations. DO NOT incinerate. 

 

 

 

Summary of Contents for Pro TX-168



















Reviews: