10
Get started
System installation and wiring
These installation instructions do not apply to all types of vehicles.
They are meant only as a general guide due to the large number of
vehicle makes and models. Consult your local motor vehicle laws on
the use of this product to be sure it is permitted.
When you install this car alarm system, make sure you do not
degrade, damage or compromise the safety of any system or device
in your vehicle.
Improper installation and wiring of the external siren may damage the
vehicle's electrical system, including vital vehicle computer and
operating systems. This could lead to an accident or cause property
damage and/or serious personal injury. It is highly recommended that
you seek professional installation advice from a qualified auto
electrician or, in the alternative, have the installation performed by a
qualified auto electrician.
Please make sure that the external siren is secured and mounted in
a location in which it will NOT obstruct any OEM vehicle safety
features. If an accident occurs and the external siren is fired as a
projectile, the manufacturer shall assume no responsibility for any
resulting bodily injury or vehicle damage.
The manufacturer assumes no liability for damage caused to your
vehicle due to improper installation or use.
This unit is designed to operate on a 12V or 24V DC negative ground
electrical system. Connecting to other types of electrical systems will
cause damage to your vehicle. Please contact the manufacturer if you
are unaware of your vehicle’s system type.
If you have no experience in installing electrical devices on vehicles,
you are not permitted to carry out the following work yourself. You
must have the assembly and connection carried out by qualified
specialists.
If connection is performed incorrectly, this may result in voltage high
enough to cause electrocution.
