6
Client Extender
Item
Type
Description
1
Power LED
LED is SOLID ON when DC is supplied to the extender unit. LED is OFF when no
power is supplied by the AC Adapter.
2
Mode
Reserved for manufacturer use.
3
Config
Reserved for manufacturer use.
4
Status LED
LED is SOLID ON when system is functioning normally. LED BLINKS when system is
booting OR to indicate a temperature warning in unison with the LINK, USB 2, and
USB 3 LEDs.
5
Link LED
LED is SOLID ON when Host Extender is linked to an opposite Client Extender. LED
is OFF when there is no connection between the Host and Client Extenders.
6
USB 2 LED
LED is SOLID ON when an active USB 2 connection is established through the ex-
tender system. LED BLINKS when the USB 2 connection is suspended/asleep. LED is
OFF when no USB 2 connection is detected.
7
USB 3 LED
LED is SOLID ON when an active USB 3 connection is established through the ex-
tender system. LED BLINKS when the USB 3 connection is suspended/asleep. LED is
OFF when no USB 3 connection is detected.
8
LAN Port (100 Mbps)
Ethernet pass through channel connects to a network or Ethernet device.
9
Link Port
Extension link Duplex LC fiber optic transceiver port.
10
Device Ports (Type A)
Accepts all USB devices.
11
DC Power Port
Locking connector for the included power adapter – accepts 24VDC 2.71A.
1
8
9
10
10
10
10
11
2
4 5 6 7
3