29
TL-CAV-01 User Manual
www.tlnetworx.com
Unable to login to
Web-based GUI
The PC’s network segment has
not been modified.
The PC’s network segment
need to be set as the
same as the TL-CAV-01-
HD’s
Static becomes
stronger when
connecting the video
connectors
bad grounding
Check the grounding and
make sure it is connected
well.
Cannot control the
display by control
device (e.g. a PC)
through RS232 port
Wrong RS232 communication
parameters
Make sure the RS232
communication
parameters are correct.
Cannot use the
device
the device is broken
Send it to authorized
dealer for repairing.
Need to reset to
factory defaults
Press and hold the On and
Off buttons on the wall
controller until all LEDs
turn off momentarily then
turn back on.
If your problem persists after following the above troubleshooting steps, seek further
help from authorized dealer or our technical support.