Page 34 of 40
UM-41-03-052
35 1 0 A 0 + 0 0 2 0 0 0 2 1
CABLE:
0 = No cable
1 = 1.5 m power cable (0367046-1500)
2 = 5 m power cable (0367046-5000)
3 = 0.2 m power cable with AMP connector (0367006)
4 = 1.5 m power and 1.5 signal (0367046-1500/0367049-1500)
5 = 5 m power and 5 m signal (0367046-5000+0367049-5000)
6 = 1.5 m Y-cable power and signal in one (0367020)
7 = 5 m powercable & datacable M 12x1 (Bus) **
IP-DEGREE:
2 = IP66 Dynamic / IP69K Static
9 = Harsh environment h IP66/IP69K
(Special article number only)
MOTOR TYPE:
A = 12VDC
B = 24VDC
STROKE LENGTH:
XXX = mm Acme spindle:
50, 150....600 mm
FEEDBACK:
0 = Standard (No feedback)
H =Hall signal
(Magnet)
A = Analog feedback 0-10V
B = Analog feedback 0,5-4,5V
D = Bus **
PCB OPTIONS:
0 = None
1 = Potential free endstop signals
* IC options for LA35:
2 = IC option
A = Modbus ** (Special article number only)
SAFETY OPTIONS:
'+ = None
1 = Safety Nut
2 = Splines
3 = Splines with safety nut
PISTON ROD EYE:
1 = Ø10,2 hole with slot (for 10mm pin) - AISI 303
2 = Ø12,9 hole with slot (for 1/2" pin)
3 = Ball eye Ø10H7
4 = Ball eye Ø12H7
A = Ø10.2 hole (for 10mm pin) - AISI 304
A = Ø10.2 hole (for 10mm pin) - AISI 304
B = Stainless steel Ø10.2 (AISI 304)
turned 90 degrees
C =
Stainless steel Ø12.9 (AISI 304)
D =
Stainless steel Ø10.2 (AISI 304)
E = Ball eye Ø10H7
F = Ball eye Ø10H7 turned 90 degrees
G = Ball eye Ø12H7
H = Ball eye Ø12H7 turned 90 degrees
BRAKE:
0 = None
1 = Brake Push
2 = Brake pull
SPINDLE TYPE:
1 = 3 mm
2 = 5 mm
3 = 9 mm
4 = 12 mm
ACTUATOR TYPE:
35 = LA35
*
** Cables option 7, Feedback option D and PCB option A are connected and can only be configured with Motor Type B
S = SMPS Cable
(Magnet)
(Magnet)
(Magnet)
0 = Ø10,2 hole (for 10mm pin) with slot
X = Special
BACK FIXTURE
X = Special
A = Stainless steel Ø10.2 (AISI 304)
7 = 6 mm
turned 90 degrees
IC options:
Basic IC
Modbus
LA35 actuator:
�
�
LA35 ordering example
