Page 28 of 40
Specifications
Motor:
Permanent magnet motor 12 or 24V *
Cable:
Motor: 2 x 14 AWG PVC cable
Control: 6 x 20 AWG PVC cable **
Housing:
The housing is made of casted aluminium, coated for outdoor use and
in harsh conditions
Spindle part:
Outer tube: Powder coated steel
Inner tube: Stainless steel AISI304/SS2333
Acme spindle: Trapezoidal spindle with high efficiency
Temperature range:
-25
o
C to +60
o
C
-13
o
F to +140
o
F
Full perfo5
o
C to +40
o
C
End play:
2 mm maximum
Weather protection:
Rated IP66 for outdoor use. Furthermore, the actuator can be washed
down with a high-pressure cleaner (IP69K)
Compatibility:
The LA35 IC is compatible with SMPS-T160 (For combination possibilities, please
see the User Manual for SMPS-T160)
Usage:
•
Duty cycle at 6000N and 3mm pitch is max. 10%
•
Noise level: 48 dB (A) measuring method DS/EN ISO 3743-1 actuator not loaded
•
Safety device regarding functional failure:
Safety nut
The LA35 has a built-in safety nut in push as an option. Actuators with safety nut in push can only function
when used in push applications. The safety nut comes into operation should the main nut fail. Afterwards it
is only possible to drive the actuator into the innermost position. Thereafter, the actuator will not function
any more and must be sent for service
Mechanical endstop
LA35 is equipped with mechanical endstop
*
Modbus actuators only 24V - please see the Modbus installation guide:
http://www.linak.com/techline/?id3=2363
** Special control cabels for the Modbus actuator - please see the Modbus installation guide:
http://www.linak.com/techline/?id3=2363
Chapter 4
