ASSEMBLY INSTRUCTIONS
STEP 1
It is recommended to have a second person assist with this step. Lift both Right and Left Handle-
bar Support Tubes up. One person should hold the both Right and Left Handlebar Support Tubes
in place while the other person tightens the bolts.
Lift both Right and Left Handlebar Support Tubes up and align bolt holes. Use two M8x35 Hexa-
gon Socket Oval Head Bolts (S1) and two Spring Washers (S2) to secure both Right and Left
Handlebar Support Tubes onto the Base Frame. Use two M8x16 Hexagon Socket Oval Head
Bolts (S3) to secure both Right and Left Handlebar Support Tubes onto the Base Frame .
Semi-tighten all bolts with the Allen Wrench provided.
NOTE: DO NOT FULLY TIGHTEN BOLTS IN STEP 1 UNTIL STEP 2 IS COMPLETED.
STEP 2
It is recommended to have a second person assist with this step. One person should hold
the Computer Console in place while the other person connects the cables.
Install the Handlebar Bracket onto the Right and Left Handlebar Support Tubes, Screw off two
Hexagon Socket Oval Head Bolts,two curved Washers on each side of support tubes. Tighten
bolts with the Allen Wrench provided.
Connect the Control Pad signal cable (A) from the right handlebar to the signal cable (B) on right
support tube.
S1
S2
S3
4
A
B
