TECHFIT E250N, Manual

Page: 28 / 28

13
calories you will burn. This is effectively the same as if you were training to improve your fitness, the
difference being the goal..
MONITOR INSTRUCTIONS
FUNCTION BUTTON
MODE
CHOOSE EACH FUNCTIONS BY PRESSING MODE KEY , IN SCAN MODE , PRESS MODE KEY
CAN LOCK THE CURRENT FUNCTION.
PRESS MODE KEY AND HOLD 2 SECONDS TO RESET ALL FUNCTIONS FIGURES.
FUNCTIONS
SCAN
THE SEQUENCE OF DISPLAY: TMR
→
SPD
→
DST
→
CAL
→
PULSE
. IN SCAN MODE, PRESS MODE KEY TO CHOOSE OTHER FUNCTION.
. AUTOMATICALLY SCAN THROUGH EACH MODE IN SEQUENCE EVERY 6 SECONDS.
SPEED
DISPLAYS CURRENT TRAINING SPEED, THE MAXIMUM IS 999.9KM/H .
TIME
ACCUMULATES WORKOUT TIME FROM 0:00 UP TO 99:00.
DIST
ACCUMULATES TOTAL DISTANCE FROM 0.0 UP TO 999.9 KM .
CAL
ACCUMULATES CALORIES CONSUPMTION DURING TRAINING FROM 0.0 CAL TO THE
MAXIMUM 999.9CAL.
(THIS DATA IS A ROUGH GUIDE FOR COMPARISON OF DIFFERENT EXERCISE SESSIONS WHICH
CAN NOT BE USED IN MEDICAL TREATMENT.)
PULSE
WITH PULSE SIGNAL INTO FOR 5 SECONDS, THE CURRENT PULSE WILL DISPLAY.
W/O PULSE SIGNAL INTO 5 SECONDS, IT DISPLAYS SHOW "P"
NOTE:
1. WITH NO SIGNAL TRANSMITTED INTO THE COMPUTER FOR 4 MINUTES,THE COMPUTER WILL
SHUT OFF THE LCD DISPLAY AUTOMATICALLY, AND ALL FUNCTION VALUES WILL BE RESERVED
2. MONITOR BATTERY SPEC: 1.5V UM-3 OR AA(2PCS).
3. IF THE COMPUTER DISPLAY ABNORMALLY, PLEASE RE-INSTALL THE BATTERY AND TRY AGAIN.
4. WHEN THE DISPLAY OF LCD IS WEAK, IT MEAN THE BATTERIES NEED TO BE CHANGED.