Teccpo TDGS01G, User Manual

Page: 17 / 24

-EN-
-14-
-Never try to charge third-party batteries with this charging unit. This will result in fire and/or explo-
sion hazard!
-Check the housing, plug and cable for damage before each use of the charging unit. Do not use
the unit if you detect damage.
-Do not open the charging unit by force. In case of a defect, the charging unit must be replaced.
-The charging unit heats up during the charging process. Do not place the unit on a flammable sur-
face or operate it in a flammable environment. Fire hazard!
-Never open the battery cells. Hazard of short circuits!
-In case of damage to the battery, hazardous vapours or fluids may escape. In case of incidental
contact flush with water and seek medical advice immediately. The fluid may have irritating or cau-
stic effects on the skin.
-Charge the batteries only at a temperature within the range of 10°C to 40°C.
-Store the battery at temperatures up to 30°C only. Higher storage temperatures may result in da-
mage to the battery. The ideal storage temperature range is 10-15°C.
-Protect the battery from heat, intense insolation and fire. Explosion hazard!
-The battery is equipped with a deep-discharge protection feature: the tool is automatically switched
off if the battery is discharged. Recharge the battery immediately if this should be the case.
-Before storing the batteries for the wintertime, charge them fully once more.
Charging the battery pack
•Connect the charger to the charging station (Fig. 2).
•Check that your mains voltage is the same as that marked on the rating plate of the battery charger
.
•Plug the battery charger in a socket-outlet. The red LED (Fig. 2 / Item A) comes on to indicate that
charging voltage is available.
•The battery pack is being charged. An empty battery pack requires a maximum charging period of
1.5 hours. The temperature of the battery pack may rise slightly during the charging operation. This
is normal.
•As soon as battery pack is fully charged, the red LED (Fig. 2/Item A) extinguishes. If the recharge-
able battery fails to charge, check whether there is voltage at the socket outlet.
Timely recharging of the battery pack will help it serve you well for a long time.
Recharging is always necessary when you notice a drop in the tool’s performance.
Never allow the battery pack to become fully discharged. This will cause it to develop a defect.
Alternatively the device can also be charged via USB cable on a
computer or something similar.
-Always keep the charging unit clear of rain or moisture. Hazard of electric shock!
- Never charge the battery in the open without protection, always choose a dry, protected place.
Switching the tool on/off (Fig. 1)
Press the safety lock (3) and activate switch (4). After the tool has been switched on,
you do not have to hold the switch-on lock (3) any longe r.