5 - 2
Balance Kit Operating Manual, 393278, en, V1.0
5 - Operation
Gravimetric Test
5.2 Gravimetric Test
5.2.1 Safety Instructions
WARNING
Automatically moving parts.
Injuries (crushing, piercing) possible, if the safety covers are not in place.
Before starting the Gravimetric Test, check if the safety panel of the
instrument is closed.
Never run the test without covers.
WARNING
Depending on the application run on the instrument, biohazardous, poisonous or
radioactive materials may have been used.
Make sure you protect your body with adequate protective gear, such as
goggles, gloves and protective clothing before starting the Gravimetric Test.
5.2.2 Gravimetric Test
It is assumed that you have carried out all steps described in chapter “Putting into
Operation” and that the test can now be carried out.
Required
Documentation
Make sure you have the following documents handy:
Instrument Software Manual that corresponds to the installed version of the
Instrument Software.
Operating Manual of SAG 285 Weighing Module.
Operating Manual of the instrument on which you wish to run the test.
Procedure
To perform the Gravimetric Test:
1
From the main menu of the
Setup & Service
software, start the test with
Liquid System > Gravimetric Test
.
2
Follow the instructions provided on screen and in the Instrument Software
Manual.
Evaluation of
Results
See Instrument Software Manual.