TEC TEC EO1-11115 Owner'S Manual Download

Page: 16 / 119

- 10 -

EO1-11115

MA-186-100 SERIES

8. Installing the Paper Roll

The printer may be used for journal-format print (standard status) or receipt-format print (optional status).
For reversing the status, refer to Chapter “16. System Option Setting”, Address 2-Bit 7” on page 72.

Turn the Control Lock to the REG position
using a Control Key.

To remove the Printer Cover, insert the
Printer Cover Key to the Printer Cover
Lock, and then turn it 90

clockwise.

Cut the paper end to make it sharp.

OFF

REG

SET

WARNING!

Care must be taken not to injure yourself with the paper cutter.

Place the paper roll into the paper pocket.
Place the paper roll as shown below.

Correct

Incorrect

Summary of Contents for TEC EO1-11115
























































































































Search results

Summary of Contents for TEC EO1-11115

Reviews:

Related manuals for TEC EO1-11115

Brands by name

Popular brands

TEC TEC EO1-11115, Owner'S Manual

Search results

Summary of Contents for TEC EO1-11115

Reviews:

Related manuals for TEC EO1-11115

Brands by name

Popular brands