manualshive.com logo in svg

TEC MA-600-1 series, Owner'S Manual, Page: 138 / 188

Share
Download
TEC MA-600-1 series Owner'S Manual Download Page 138

4. PROGRAMMING OPERATIONS

 

EO1-11155 

 

4.5 Store Name Message Programming 

4-15

 

4.5 Store 

Name 

Message Programming 

A maximum of 128 characters of Store Name Message (32 characters x 4 lines) to be printed on the receipt is 
programmed here.  This programming is possible only when the store message specification has been selected 
by the program option, however, it is not possible when the logo message has been selected. 
 
 

Any time outside a sale 

 
 Mode 

Lock: 

SET 

 
1) Menu 

Tree 

 

 
2) Operation 

Flowchart 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

OPERATION 

CONDITION 

[Enter] 

“1 MESSAGES” is 

selected. 

Main Menu 

“3 STORE MESSAGE” is 
selected. 

Input a message in the 

1st line. 

Input a message in the 

2nd line. 

Input a message in the 

3rd line. 

[Enter] 

[Enter] 

[Enter] 

[Enter] 

[Enter] 

ECR is being outside a sale and in SET mode. 

Depress [1] or [Enter] key. 

The 1st line message is entered and the 
programmed data is printed. 

The ECR enters the 1st line input mode. 

Depress [3] or [Enter] key. 

The ECR enters the 2nd line input mode. 

The ECR enters the 3rd line input mode. 

The 2nd line message is entered and the 
programmed data is printed. 

The 3rd line message is entered and the 
programmed data is printed. 

A maximum of 32 one-byte or 16 two-byte 
characters are input. 

A maximum of 32 one-byte or 16 two-byte 
characters are input. 

A maximum of 32 one-byte or 16 two-byte 
characters are input. 

[End] 

This setting is ended.  A long receipt is issued 
and the display returns to Main Menu screen.

 

Input a message in the 

4th line. 

[Enter] 

[Enter] 

A maximum of 32 one-byte or 16 two-byte 
characters are input. 

The ECR enters the 4th line input mode. 

The 4th line message is entered and the 
programmed data is printed. 

*: To program a message in a 

desired line, move the cursor 
there with the [

↓

] key then 

depress the [Enter] key. 

* 

Summary of Contents for MA-600-1 series





























































































































































































Reviews:

No comments