3. READ (X) AND RESET (Z) REPORTS
EO1-11155
3.2 General Notes On Report Takings
3-20
(2) Close Batch
A close batch command is sent to the EFT terminal.
Sales transaction of the day is ended and a batch file is sent to the host to make a settlement.
Example
•
Operation: Mode Lock:
Z for reset (reset only)
When the ECR is being outside a sale and in Z mode, depress the
[
↓
] key twice to select “3 EFT(BATCH)”. And depress the [3] or
[Enter] key.
Depress the [
↓
] key to select “2 CLOSE BATCH” and depress the
[2] or [Enter] key.
The close batch is in process.
When the operation was successfully completed, this message is
displayed.
If it was failed, an error message is displayed. (NOTE 2, NOTE 3)
OK:
The operation was successfully completed.
NG:
The operation was failed.
BATCH ALREADY CLOSED is printed under NG when CLOSE BATCH has already been
executed.
NOTES:
1.
After processing, a receipt showing the processing result is issued.
2.
When no response was sent from the EFT terminal within a specified time (standard: 10 minutes), a timeout
error occurs on the ECR and an error message “NO RESPONS” is shown on the LCD display.
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
10-20-2006 FRI #3001
CLOSE BATCH
OK
9999 07:30TM
Summary of Contents for MA-600-1 series
Page 1: ...TEC Electronic Cash Register MA 600 1 SERIES Owner s Manual...
Page 5: ...OPERATOR S GUIDE...
Page 85: ...MANAGER S GUIDE...
Page 188: ...E PRINTED IN CHINA EO1 11155A...
