TEC MA-600-1 series, Owner'S Manual

Page: 129 / 188

4. PROGRAMMING OPERATIONS
EO1-11155
4.1 Instructions for Programming
4- 6
4.1.4 Basic Key Functions
Programming operations in this chapter are performed with the keyboard layout for programming.
1.
The following are main keys and their functions to be used in programming operations.
(1) Keys for selecting items on the menu screen
Key Function
[
↑
] This key is used for moving the cursor upward.
[
↓
] This key is used for moving the cursor downward.
[
←
] This key is used for moving the cursor leftward.
[
→
] This key is used for moving the cursor rightward.
[Enter] This key is used for selecting a desired item after moving the cursor.
[Rtn] This key is used for returning the display to the previous screen.
[?] While ? is shown on the upper-right corner of the LCD display screen, the [?] key
depression results in that a guidance message corresponding to the current operation
appears on the LCD display.
(2) Keys for character entries
Key Function
[
→
] This key is used for entering a one-byte space.
[C] This key is used for deleting all the entered characters together.
[Dbl] This key is used for switching character mode between “one-byte character” and “two-
byte character” alternately.
[A/a] This key is used for switching between “capital letter” and “small letter” alternately.
The key is effective when entering characters A to Z through the programming
keyboard or PK-2 keyboard (hardware option).
[Del] This key is used for deleting a character.
[#] In the character code entry method, entering a character code then depressing this
key results in that the corresponding character is entered.
[History] This key is used for performing character entries with the name previously entered.
(3) Keys for programming
Key Function
[
←
] This key is used for selecting a desired item.
[
→
] This key is used for selecting a desired item.
[C] This key is used for canceling an operation just performed.
[Enter] This key is used for entering a desired item.
[Rtn] This key is used for returning the display to the previous screen.
[?] While ? is shown on the upper-right corner of the LCD display screen, the [?] key
depression results in that a guidance message corresponding to the current operation
appears on the LCD display.
[End] This key is used for ending the current programming operation.
[PLU] This key is used for the PLU programming.
2.
Functions of the [C] key:
•
When an entered program data is already printed, the [C] key cannot clear if any longer. To correct the
data, re-enter it.
•
Before the entered data is printed, the data may be cleared by the [C] key (except in the SFKC
Programming Operation).