- 95 -
EO3-11070B
MA-1650-4 SERIES
Address No.
Description of Programming Contents
-- Continued --
9
PLU Group No. (for purposes of reports)
•
Enter a 2-digit code (1 to 99) as a PLU Group No. to which the PLU belongs,
and depress [#]. To cancel the Group No. once set, enter 0 and depress [#].
•
The name of each PLU Group will be programmed in Submode 29.
10
Link-PLU Table No. (for PLU-to-PLU linking requirement only)
•
This entry is useful, similar to the “Sub-link Dept.” feature in the DEPART-
MENT TABLE PROGRAMMING operation, when the PLU item entry should
always be followed by another PLU item sale. If the PLU is not applied to this
case, skip this address entry. Refer to the following examples of applications:
HEAD-LINK PLU
SUB-LINK PLU
Example 1)
PLU 1: Coca-Cola
PLU 2: Bottle
Small Bottle
Deposit for the
Net Content
small bottle
at $0.45
at $0.05
Example 2)
PLU 101: Battery-
PLU 101: Battery-
drive Clock
Pack at $1.50
at $20.00
As shown in the examples, this feature prevents the cashier from forgetting to
enter the Sub-link PLU item attached to the Head-link PLU item. And at the same
time, in reports, two PLU Totals are separately read.
•
In setting, enter the Link-PLU Table No. (1 to 99) and then depress [#].
[#]
1 to 99 (Link-PLU Table No. The Sub-link PLU which link to the Link-PLU Table will be
programmed in a separate programming operation later.)
•
To cancel the sub-linking, enter 0 instead of the Link-PLU Table No. before
[#].
•
REMARKS:
1)
When the Head-link PLU is entered in a sale, the Sub-link PLU will
automatically be entered. When the Sub-link PLU is an open-price
PLU, the price entry and the [AMT] key depression should follow
manually on the main keyboard. This manual operation sequence
cannot be replaced by a PLU Preset-code Key on the main keyboard
or on the PK-2 keyboard.
2)
The PLU-to-PLU linkage is effective even when the Head-link PLU
is an open-price PLU.
-- Continued on next page --
