Chapter 3 Printing
43
Printing Preferences
•
In Printing Preferences, the preferred settings can be saved in the
file for a particular print job. If several kinds of print jobs are
performed, it is strongly recommended to use this function to save
the preferred settings in the file for each print job.
When using Printing Preferences, the following settings can be
saved. For more details of each setting, see the section indicated
in the right column of the table below.
Note:
Regardless of whether the Set Check
box is marked or not, the shaded area
will be enabled when saved as the
preferred settings.
See Sections 3.6.5 and 3.7.2 for more
detail.
See Section ...
3.3.1
3.3.3
3.3.4
3.4.1
3.4.3
3.6.1
3.6.2
3.6.3
3.6.4
3.6.5
3.7.1
3.7.2
Tab
Page Setup
Graphics
Stock
Options
Settings
Name
Orientation
User Commands
Dithering
Color Control
Print Method
Sensor
Label Gap
Issue Mode
Cut
Cut Interval
Feed (Fine Adjustment)
Back feed (Fine Adjustment)
Cut/Strip (Fine Adjustment)
Stop Position (Fine Adjustment)
Transfer Mode
Print Density Adjustment
3.3.4
Miscellaneous
(Cont.)
Summary of Contents for CB-426-T3-QQ
Page 1: ...TEC Two Color Printer CB 426 T3 QQ Owner s Manual ...
Page 121: ......
Page 122: ...PRINTED IN JAPAN EO1 33027 E ...
