TEC CB-426-T3-QQ Owner'S Manual Download Page 42

Page: 42 / 122

Chapter 3 Printing

Choose the port that the printer is connected to, and click Next.

Note:

If no printer driver has been installed
before, this printer will be used as a
default printer automatically.

Type in a printer name that you prefer to use.

Select whether the printer will be used as the default printer for
all applications. Then click Finish.

Finally, make sure that the CB-426-T3 icon has been added in
Printers. Installation of the printer driver has been completed.

Notes:

•

The ECP Printer port is recommended.

•

Please refer to the user's manual of
your computer for further information
regarding the setting of the ECP
Printer port.

3.1.2

Installation
Procedure (Cont.)

Summary of Contents for CB-426-T3-QQ



























































































































Search results

Summary of Contents for CB-426-T3-QQ

Reviews:

Related manuals for CB-426-T3-QQ

Brands by name

Popular brands

TEC CB-426-T3-QQ, Owner'S Manual

Search results

Summary of Contents for CB-426-T3-QQ

Reviews:

Related manuals for CB-426-T3-QQ

Brands by name

Popular brands