6-6
6. DIAG. TEST OPERATION
EM18-33011
6.2.2 Automatic Diagnostic Printing
The data from
1
to
9
on a sample print is printed.
(Revision Date: Jan. 13 '95)
6.2 SELF TEST MODE
NOTES: 1. If the automatic diagnosis printing results in an error, the printer will display the error
message and stop printing. The error status can be cleared by the [PAUSE] key, however,
the display will return to the initial display "<1> DIAG. V1.0A". Printing is not automatically
resumed.
2. Both label and tag paper can be used for printing.
Power off
Press the [PAUSE] key.
Press the [PAUSE] key.
Press the [PAUSE] key.
Select the ribbon type from those
at the right by pressing the
[FEED] key or [RESTART] key.
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
< 1
D I A G .
V 1 . O A
>
R I
B O N
T R A N S .
B
A U
O
D I A G N O S T I C
T
C H
C K I N G
&
P R I N T
E
The result of the self test
is printed. After printing,
the initial display will be
shown.
NO RIBBON (No ribbon : Thermal direct)
NO TRANS.
TRANSMISSIVE
(Transmissive ribbon : Thermal transfer)
(Non-transmissive ribbon : Thermal transfer)
The printer is checking or printing
the status
